Language Selection

English French German Italian Portuguese Spanish

BIOS Flash update under linux.

Filed under
Linux

I figured it was finally time to do a BIOS update on one of my main Linux boxes. The MSI NF 980-G65 AMD motherboard came with an AMI BIOS dated September 2009. This MSI motherboard is based on the NVidia NForce 980a chipset, and has built-in NVidia GeForce 8300 video (which I do not use).

Powering up this system has always been a little flaky, requiring a couple of reset-button presses before it would boot into Linux (it would hang at the BIOS splash screen). After boot-up, the system always ran great.

Alright, so on to the BIOS update. MSI has the live update online program which requires, of course, Microsoft Windows, and the Internet Explorer browser. Well, I don't have these on this system, and don't want to put them on it.

In the AMI BIOS setup program, I see the M-Flash option. I try this, but can't get it to work. Some research on the Internet indicates that it's very likely you'll wreck your BIOS using M-Flash anyway, so that's out.

After googling about, I finally go to this site to see how to flash a motherboard bios from linux with no DOS, no MS Windows, and no floppy-drive.

This technique involves getting a freedos DOS floppy boot image, mounting this floppy image temporarily using mount loop, copying the flash exe and rom files to the mouted floppy image, and burning this to a CD. So you end up with a bootable DOS CD with your two flashing files on it. You then boot your computer from the CD and flash your motherboard.

This all works fine, and I flash the motherboard with the new BIOS version.

Upon reboot, the system seems sluggish, and I can't boot into a GUI. After reading the error messages when I try startx, I see that the nvidia blob driver is trying to use the built-in NVidia card rather than my slotted PCI-E NVidia GeForce 460 card.

Back into the BIOS setup--set the PCI-E as primary, and disable the SLI hybrid setting.

OK, reboot, and I now have a GUI. But it's incredibly sloooooow. It's so slow, I can't re-size a konsole terminal. Turning off desktop effects compositing helps a little, but I finally see what everyone is complaining about with slow NVidia-KDE4 performance. But come on! After all, this is an NVidia GeForce GTX 460 256-bit memory 1024 GDDR5 ram card here. I spent over $200 on this card because I use the system for video editing.

I go to the KDE NVidia performance tuning site and read all the info. I copy and paste this stuff into the device section of my /etc/X11/xorg.conf file:
------------------------------------------------
Option "RenderAccel" "true"
Option "UseEvents" "false"
Option "TripleBuffer" "1"
Option "DamageEvents" "1"
Option "BackingStore" "1"
Option "PixmapCacheSize" "70000"
Option "OnDemandVBlankInterrupts" "true"
-------------------------------------------------

Reboot, and this does the trick! My system performance is back to normal. But, remembering back when I built this box, I bought very fast rated memory, so I went back into the BIOS setup and optimized the RAM timings. Now, I have a system faster than I ever had before. And the icing on the cake is, it's very, very stable. Boot problems are gone. No freezes or lockups.

It is a mystery to me why the BIOS update initially screwed-up the NVidia video performance.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.