Language Selection

English French German Italian Portuguese Spanish

SUSE 10.1 Alpha 4 Report

Filed under
Reviews
SUSE
-s

OpenSuSE's SUSE Linux 10.1 alpha4 was released right on schedule December 15 and as usual those developers have been hard at work. No big visual changes, but plenty under-the-hood serve as testament to their dedication. Again some key features this release include superior performance, unparalleled stability, and unrivaled software availability.

The installer has remained basically untouched. It's still the same great beauty to which we've grown accustomed. There seemed to be issues with the Tuxracer package as it would not install here and yast always complained whenever running the software install/uninstall tool or online update. The online update wasn't functional either as it couldn't connect to a needed reference site.

In this release we find that KDE has been updated to 3.5 final and Firefox has been updated to 1.5 final. There isn't a whole lot to report visually, but I did note in the panel is Knemo. It appears to be a kde app/applet that monitors network traffic. KDE performs really well and no problems were encountered during testing.

Gnome is a different subject. It is reported that it has been upgraded to 2.12.2, but it is still problematic for SuSE. It wouldn't even start for me here today. Instead it stopped at the error 'NetworkManager couldn't find necessary resources and can not continue.' 2.12.3 has been recently released. We'll probably see it integrated before final, although clearly the problem exists with the NetworkManager. I had installed 'all of gnome' during the distribution installation, but to be sure, I went back and installed the gnome development packages and even all of mono. I even made sure my hostname and ips were in the /etc/hosts file. All to no avail. Alas, gnome is broken.

Another new addition is the plethora of calculators. I didn't realize this was such a hot area, but apparently SuSE isn't going to be left behind. They now feature at least 7 or 8 different calculators from which to choose. Although admittedly, some appear to be mere skin/theme difference. However it does make for an impressive menu item. Big Grin

The handheld synchronization menu seemed a bit beefier as well. There are the old standbys as well as the new KDE featured Kitchensync as well as one for the pocketpc and possibly others I'd not noticed before.

Yast2 seemed to have a slightly different appearance this release as well. In fact, it seemed a step backwards to me. Instead of white on white, we are now presented with white on gray. More importantly, the widgets seem to be a more old-fashioned after-step or something. I get the feeling this is a temporary situation related to something missing, broken, or needing rebuilding as well.

        

Some version highlights this release include:

  • glibc -> 2.3.6
  • gtk2 -> 2.8.7
  • gnome -> 2.12.2
  • KDE -> 3.5
  • xorg -> 6.9 rc3
  • Linux -> 2.6.15 rc5
  • Bash -> 3.1
  • Digikam -> 0.8
  • Firefox -> 1.5
  • KDE -> 3.5
  • KOffice -> 1.5 Preview (1.4.89-4)
  • Qt -> 4.1 rc1
  • Wine -> 0.9.3
  • gaim -> 1.5.0-18
  • perl -> 5.8.7-6
  • gcc -> 4.1.0_20051129-3
  • gimp -> 2.2.9-9
  • Full rpmlist as installed.

Changelog Highlights include:

  • blackbox:
    • Updated to version 0.70.1
    • split devel package for libbt
  • kernel:
    • update to 2.6.15-rc5-git3
    • update patches.arch
  • tclplug:
    • Updated the source tarball to the latest CVS snapshot (3.0.2)
  • NetworkManager:
    • Update to 0.5.1cvs20051212
    • Add Tango icon in KDE
  • tango-icon-theme:
    • Update to 0.6.2
  • f-spot:
    • Updated to Version 0.1.5
  • hal::
    • updated to new cvs version (0.5.6_CVS_20051212)
    • added patche(s):
      - hal-fix-mount_script_v2.diff
      - hal-fix-fdi_make_dist.diff
  • k3b:
    • update to 0.12.9
  • pam-modules:
    • Update to pam_unix2-1.27
  • sysconfig:
    • ifup-wireless: Added some more WPA config variables
    • moved all variables from /etc/sysconfig/network/wireless to
      ifcfg.template
    • documented all used WLAN variables in ifcfg.template
    • set version to 0.41.1
  • MozillaThunderbird:
    • update to 1.5 (20051211)
    • update enigmail to 0.93.2
  • irssi:
    • 0.8.10 is final!
  • NX:
    • updated to the latest stable 1.5.0 release of nx-X11/nxcomp
  • bash:
    • Update to bash version 3.1 and readline library version 5.1
  • beagle:
    • Requires mozilla -> mozilla-xulrunner
    • Don't autostart in gnome-session, it's now started via the autostart thing.
    • Install desktop files for autostart in GNOME.
  • Full Changelog since Alpha3

Well, there ya have it. Quite a few things seem broken this time, but as noted several major system libraries went through an upgrade and probably contributed to these wrinkles. As the old saying goes, you have to break a few eggs to make an omelet, and SuSE is still chopping up the veggies. Final is quite a ways away, so have no fear. For those who like to run the bleeding edge, perhaps resist the urge this time and wait for Beta 1 next month.

Previous coverage:

when OO.o 2.0 final?

When is OpenOffice.org going to be updated to 2.0 final?

Re: when OO.o 2.0 final?

bhuot wrote:

When is OpenOffice.org going to be updated to 2.0 final?

I believe it is. It's showing OpenOffice_org-2.0.0.99.140-2.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.