Language Selection

English French German Italian Portuguese Spanish

today's howtos

Filed under
HowTos
  • How to Install Nvidia 495.xx Beta Drivers on Linux Mint 20 - LinuxCapable

    Most modern Linux Desktop systems such as Linux Mint come with an Nvidia driver pre-installed in the Nouveau open-source graphics device driver for Nvidia video cards. For the most part, this is acceptable; however, if you are using your Linux system for graphical design or gaming, you may get better drivers.

    Historically, the Nouveau proprietary drivers are slower than Nvidia’s proprietary drivers, along with lacking the newest features, software technology, and support for the latest graphics card hardware. In most situations, upgrading your Nvidia Drivers using the following guide is more beneficial than not doing it. In some cases, you may see some substantial improvements overall.

    The following tutorial will teach you how to install the latest bleeding-edge Nvidia Beta Graphic drivers for Linux Mint 20.

  • How To Setup NTP Server and Client on Ubuntu 20.04 LTS - idroot

    In this tutorial, we will show you how to install a setup NTP server and client on Ubuntu 20.04 LTS. For those of you who didn’t know, NTP (stands for network time protocol) is used to synchronize the system clock of the client system with the clock of the server. The NTP server has features that allow synchronization between two systems with an accuracy of one nanosecond so that the two systems can communicate easily. System time applies not only to the user but also to the computer itself. In fact, time stamps make it easy to communicate between two or more computers and provide network services properly, as well as optimizing the network card.

    This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the configure NTP server and client on Ubuntu 20.04 (Focal Fossa). You can follow the same instructions for Ubuntu 18.04, 16.04, and any other Debian-based distribution like Linux Mint.

  • How to Create a Basic HTML5 Project in Ubuntu Using Netbeans

    In this 4-article mobile web development series, we will walk you through setting up Netbeans as an IDE (also known as Integrated Development Environment) in Ubuntu to start developing mobile-friendly and responsive HTML5 web applications.

  • How to Install Keras With TensorFlow Backend on Ubuntu - Unixcop

    Keras is an open-source software library that provides a Python interface for artificial neural networks. Keras acts as an interface for the TensorFlow library.

    It is a neural network library based on the Python programming language designed to simplify machine-learning applications. Keras runs on top of frameworks such as TensorFlow.

    So In this guide, we will show you how to install Keras on Ubuntu systems.

  • How to Install Postman REST Client in Debian 11 – Citizix

    In this guide, we are going to explore how to install Postman Client on Debian 11.

    Postman is an application used for API testing. Postman is the Complete API Development Environment with Integrated Tools for Every Stage of the API Lifecycle. It is an HTTP client that provides a graphical user interface through which you can tests HTTP requests while obtain different types of responses. Postman allows us to build, test and modify the API.

    Postman can run PUT, PATCH, DELETE, and various other request methods as well, and also has utilities to help with developing APIs. Free and paid versions are available for Mac, Windows, Linux, and also as a Chrome app.

  • How to install Etcher on CentOS 8 - Unixcop

    balenaEtcher (commonly referred to and formerly known as Etcher) is a free and open-source utility used for writing image files such as .iso and .img files, as well as zipped folders onto storage media to create live SD cards and USB flash drives.

    Etcher is primarily used through a graphical user interface. Additionally, there is a command line interface available which is under active development.

    Etcher is a good choice even for those who are not particularly tech-savvy.

  • How to install Etcher on Ubuntu - Unixcop

    balenaEtcher is a free and open-source utility used for writing image files such as .iso and .img files, as well as zipped folders onto storage media to create live SD cards and USB flash drives.

    Etcher is primarily used through a graphical user interface. Additionally, there is a command line interface available which is under active development.

    In this tutorial, you will learn how to install Etcher on Ubuntu with two methods.

  • vcgencmd command not found - blackMORE Ops

    I have Debian and Ubuntu running on two separate Raspberry Pi 4 8GB. As these are not your usual Raspbian OS, they didn’t come with vcgencmd binaries. Understandably, I received the following error when I tried to measure temperature on my Raspberry Pi 4.

  • Bash tr Command

    `tr` is a very useful UNIX command. It is used to transform strings or delete characters from the string. Various types of transformation can be done by using this command, such as searching and replacing text, transforming string from uppercase to lowercase or vice versa, removing repeated characters from the string, etc. The command can be used for some complicated transformations also. The different uses of the `tr` command have shown in this tutorial.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.