Language Selection

English French German Italian Portuguese Spanish

Open Hardware/Modding With Components, Arduino

Filed under
Development
Hardware
  • Automating Pool Monitoring And Chemical Dosing | Hackaday

    The project uses a TI SimpleLink wireless-enabled microcontroller to run the show, which allows data to be offloaded to a base station for graphing with Grafana. The system can monitor pH levels as well as ORP (oxidation/reduction potential) levels using probes attached via BNC connectors. Based on these readings, the device can dose chlorine into the pool as needed using a peristaltic pump driven by a TI DRV8426 stepper motor driver.

  • $99 Lepton FS module cuts the cost of FLIR thermal cameras by half - CNX Software

    Thermal cameras based on FLIR Lepton modules are pretty cool, but also quite expensive. Teledyne FLIR Lepton FS offers a much more cost-effective solution with the non-radiometric 160 x 120 resolution micro thermal camera module going for $99, or about 50% less than other FLIR thermal camera modules.

    The lower cost was achieved with some tradeoffs, notably a reduction of thermal sensitivity and scene dynamic range, as well as up to 3% inoperable pixels. But Ron Justin, GroupGets founder, told CNX Software that the lower specs are more than worth it for users only needing an imager, as opposed to a radiometric sensor.

  • Raspberry Pi Weekly Issue #374 - Raspberry Pi <3 LEGO Education

    The collaboration of your dreams launched this week. We worked with LEGO® Education to design the new Raspberry Pi Build HAT, a brand-new product that for the first time makes it easy to integrate LEGO® Technic™ motors and sensors with Raspberry Pi computers.

  • Bring That Old Hi-Fi Into The 2020s | Hackaday

    It’s a distressing moment for some of us, when a formerly prized piece of electronic equipment reaches a point of obsolescence that we consider jettisoning it. [Jon Robinson] ran into this dilemma by finding the Kenwood Hi-Fi amplifier his 17-year-old self had spent his savings on. It was a very good amp back in the day, but over two decades later, it’s no longer an object of desire in a world of soundbars and streaming music boxes. After a earlier upgrade involving an Arduino to auto-power it he’s now given it an ESP32 and an i2S codec which performs the task of digital audio streaming as well as a better job than the Arduino of controlling the power.

  • This Arduino Terminal Does All The Characters | Hackaday

    The job of a dumb terminal was originally to be a continuation of that performed by a paper teletype, to send text from its keyboard and display any it receives on its screen. But as the demands of computer systems extended beyond what mere ASCII could offer, their capabilities were extended with extra characters and graphical extensions whose descendants we see in today’s Unicode character sets and thus even in all those emojis on your mobile phone. Thus a fully-featured terminal has a host of semigraphics characters from which surprisingly non-textual output can be created. It’s something [Michael Rule] has done some work on, with his ILI9341TTY, a USB serial terminal monitor using an Arduino Uno and an ILI9341 LCD module that supports as many of the extended characters as possible.

More in Tux Machines

Security Leftovers

  • Linux Fixes Spectre V1 SWAPGS Mitigation After Being Partially Borked Since Last Year - Phoronix

    This week's set of "x86/urgent" changes for the Linux 5.16-rc4 kernel due out later today has some Spectre V1 fixes after kernel commits last year ended up partially messing things up around its SWAPGS handling. These fixes in turn will also likely be back-ported to relevant stable kernel series. Thanks to an Alibaba engineer, Lai Jiangshan, are some important fixes around the Spectre V1 SWAPGS mitigation that are landing today in the mainline kernel.

  • Reproducible Builds: Reproducible Builds in November 2021

    As a quick recap, whilst anyone may inspect the source code of free software for malicious flaws, almost all software is distributed to end users as pre-compiled binaries. The motivation behind the reproducible builds effort is therefore to ensure no flaws have been introduced during this compilation process by promising identical results are always generated from a given source, thus allowing multiple third-parties to come to a consensus on whether a build was compromised. If you are interested in contributing to our project, please visit our Contribute page on our website.

  • Reproducible Builds (diffoscope): diffoscope 195 released

    The diffoscope maintainers are pleased to announce the release of diffoscope version 195. This version includes the following changes:

    [ Chris Lamb ]
    * Don't use the runtime platform's native endianness when unpacking .pyc
      files to fix test failures on big-endian machines.
    

Linux 5.16-rc4

Fairly small rc4 this week. Three areas stand out in the diff: some
kvm fixes (and tests), network driver fixes, and the tegra SoC sound
fixes.

The rest is fairly spread out: drm fixes, some filesystem stuff,
various arch updates, and some smattering of random driver fixes.

Nothing looks all that scary, although I certainly hope the kvm side
will calm down.

                  Linus
Read more Also: Linux 5.16-rc4 Released - "Nothing Looks All That Scary"

EFF Argument in Patent Troll Case to Be Livestreamed on Monday

At 10 am Monday, FOSS folks and others interested in software patent litigation will have a chance to have a firsthand look at how our courts address patent cases. The case involves a “notorious patent troll,” according to Electronic Frontiers Foundation, that is trying to hide information from Apple, which it’s suing. “At a federal appeals court hearing that will be livestreamed, attorney Alexandra H. Moss, Executive Director at Public Interest Patent Law Institute, who is assisting EFF in the case, will argue that a judge’s order to unseal all documents and preserve public access in the case of Uniloc USA, Inc. v. Apple Inc. should be upheld,” EFF said in a statement on Thursday. “Uniloc is entitled to resolve its patent dispute in publicly-funded courts, Moss will argue, but it’s not entitled to do so secretly.” EFF said that this is the second time the plaintiff, Uniloc, has appealed an order to be more transparent in this case. Read more

Gnuastro 0.16 released

Dear all,

I am happy to announce the 16th official release of GNU Astronomy
Utilities (Gnuastro version 0.16).

Gnuastro is an official GNU package, consisting of various
command-line programs and library functions for the manipulation and
analysis of (astronomical) data. All the programs share the same basic
command-line user interface (modeled on GNU Coreutils). For the full
list of Gnuastro's library, programs, and a comprehensive general
tutorial (recommended place to start using Gnuastro), please see the
links below respectively:

https://www.gnu.org/s/gnuastro/manual/html_node/Gnuastro-library.html
https://www.gnu.org/s/gnuastro/manual/html_node/Gnuastro-programs-list.html
https://www.gnu.org/s/gnuastro/manual/html_node/General-program-usage-tutorial.html

For a complete review of the new/changed features in this release,
please see [1] below (also available in the 'NEWS' file within the
source code tarball).

Here is the compressed source and the GPG detached signature for this
release. To uncompress Lzip tarballs, see [2]. To check the validity
of the tarballs using the GPG detached signature (*.sig) see [3]:

  https://ftp.gnu.org/gnu/gnuastro/gnuastro-0.16.tar.lz    (3.7MB)
  https://ftp.gnu.org/gnu/gnuastro/gnuastro-0.16.tar.gz    (5.9MB)
  https://ftp.gnu.org/gnu/gnuastro/gnuastro-0.16.tar.gz.sig (833B)
  https://ftp.gnu.org/gnu/gnuastro/gnuastro-0.16.tar.lz.sig (833B)

Here are the SHA1 and SHA256 checksums (other ways to check if the
tarball you download is what we distributed). Just note that the
SHA256 checksum is base64 encoded, instead of the hexadecimal encoding
that most checksum tools default to.

fe1f84bf1be270f1a62091e9a5f89bb94b182154  gnuastro-0.16.tar.lz
B4hftfYuyc7x3I6aEJ2SQlkp6x7zOOrPz/bK2koGuR8  gnuastro-0.16.tar.lz
1ae00673648fe8db5630f1de9d70b49fadb42d7d  gnuastro-0.16.tar.gz
kMEdJbsFrRNxDLX4EXntgXNgikJv3/2LIEWGLV/e4i0  gnuastro-0.16.tar.gz

For this release, Pedram Ashofteh Ardakani, Natáli D. Anzanello,
Sepideh Eskandarlou, Raúl Infante-Sainz, Vladimir Markelov and Zahra
Sharbaf directly contributed to the source of Gnuastro, I am very
grateful to all of them. I should also thank Alejandro Serrano
Borlaff, Fernando Buitrago, Mark Calabretta, Zohreh Ghaffari, Giulia
Golini, Leslie Hunt, Raúl Infante-Sainz, Matthias Kluge, Juan Miro,
Juan Molina Tobar, Markus Schaney, Zahra Sharbaf, Vincenzo Testa,
Ignacio Trujillo and Aaron Watkins for their very good suggestions or
bug reports that have been implemented in Gnuastro 0.16.

If any of Gnuastro's programs or libraries are useful in your work,
please cite _and_ acknowledge them. For citation and acknowledgment
guidelines, run the relevant programs with a `--cite' option (it can
be different for different programs, so run it for all the programs
you use). Citations _and_ acknowledgments are vital for the continued
work on Gnuastro, so please don't forget to support us by doing so.

This tarball was bootstrapped (created) with the tools below. Note
that you don't need these to build Gnuastro from the tarball, these
are the tools that were used to make the tarball itself. They are only
mentioned here to be able to reproduce/recreate this tarball later.
  Texinfo 6.8
  Autoconf 2.71
  Automake 1.16.4
  Help2man 1.48.5
  ImageMagick 7.1.0-9
  Gnulib v0.1-4944-g7fc3219bc
  Autoconf archives v2021.02.19-29-g0fbee2a

The dependencies to build Gnuastro from this tarball on your system
are described here:
  https://www.gnu.org/s/gnuastro/manual/html_node/Dependencies.html

Best wishes,
Mohammad
Read more