Language Selection

English French German Italian Portuguese Spanish

Devices/Embedded/Hardware Leftovers

Filed under
Hardware
  • Where To Purchase Lenovo Computers With Ubuntu Preinstalled

    This article is for you to find Lenovo desktop and laptop computers sold with Ubuntu preinstalled. We want everyone to know that Ubuntu computers exist and help them to buy quality computers they want. This article is part of our support to Free Software Business and also a response to Lenovo's 2020's announcement of the availability of their Ubuntu-powered ThinkPad and ThinkStation.

  • QNAP TBS-464 ultra-thin NAS supports 4 M.2 NVMe SSDs, 2.5GbE networking - CNX Software

    Most NAS are large boxes that take several 3.5-inch SATA drives, but QNAP TBS-464 NASbook is a different beast with an ultra-thin design enabled by four M.2 PCIe slots for NVMe SSDs, plus two 2.5 GbE ports to match the higher data transfer speed allowed by the SSDs.

    The NAS is equipped with a recent Intel Celeron N5105/N5095 Jasper Lake quad-core processor coupled with 8GB DDR4 memory, and also offers USB 3.0 ports, as well as two HDMI 2.0 video outputs and an IR receiver that would make it suitable as a NAS & HTPC combo, for example, running Plex.

  • BrainChip AKD1000 SNN AI SoC gets Raspberry Pi and x86 development kits - CNX Software

    BrainChip has introduced two development kits for its Akida AKD1000 neuromorphic processor based on Raspberry Pi and an Intel (x86) mini PC in order to enable partners, large enterprises, and OEMs to begin testing and validation of the Akida chip.

  • Rockchip RK3566/RK3568 SoM’s feature board-to-board connectors or castellated holes

    Rongpin Electronics has designed RK3566 and RK3568 systems-on-modules (SoM) with either board-to-board connectors or castellated holes for direct soldering to the carrier board, which adds competition to the Firefly Core-3568J AI Core Rockchip RK3568 system-on-module offered in a SO-DIMM form factor with an edge connector.

More on BrainChip

  • Raspberry Pi Powers Neural Network Processor Dev Kit | Tom's Hardware

    BrainChip, the neuromorphic AI specialist, has announced on Twitter that it is now taking orders for two new development kits for its Akida advanced neural networking processor, as spotted by CNX Software. One of the development kits comes with a Raspberry Pi 4, and the other, which is twice the price, comes with a barebones X86 mini PC.

Neuromorphic edge AI chip debuts on Raspberry Pi and Comet Lake

  • Neuromorphic edge AI chip debuts on Raspberry Pi and Comet Lake dev kits

    BrainChip has launched two “Akida Development Kits” for its self-learning, low-power “Akida NSoC” neural networking chip for edge AI. One uses the Raspberry Pi CM4 and the other a Comet Lake-S based Shuttle PC system.

    BrainChip Holdings has opened pre-orders for two development kits that showcase its Akida neural networking processor (Akida NSoC). The Linux-driven, $4,995 Akida Development Kit — Raspberry Pi and Linux and Win 10 compatible $9,995 Akida Development Kit — Shuttle PC implement the Akida NSoC via a mini-PCIe module equipped with BrainChip’s AKD1000 silicon.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

Raspberry Pi CM4-based panel PC offers DAQ inputs and M.2 NVMe

Sensoper’s 7-inch “SC-PC” HMI panel PC runs Linux on a Raspberry Pi CM4 and supplies GbE, M.2 for NVMe, RS-485, 3x USB, 8x digital inputs, 7x transistor outputs, and 8x analog inputs with a choice of 0-10V or 4-20mA ranges. Michigan-based Sensoper Controls has launched a 7-inch, industrial panel-PC in two variants: an SC-PC-AV8-TO7 model with 8x 0-10V analog inputs and an SC-PC-AM8-TO7 with 4-20mA analog inputs. The otherwise identical panel PCs run Raspbian (Raspberry Pi OS) Linux with pre-installed Node-RED on the Raspberry Pi Compute Module 4. Read more

Android Leftovers

Best Open Source Gantt Chart Software for Linux

Gantt chart is the simplest way to assign resources, manage timelines, and visualize dependencies. It helps you to avoid confusion and cut unproductive events. With a glance, you can have all activities, allocated assets, and the scheduled dates of each. While a Gantt chart is a must for any complex project, in general, you need this project management tool: Read more

NuTyX 21.10.5 available with cards 2.4.140

The NuTyX team is happy to announce the new version of NuTyX 21.10.0 and cards 2.4.138. The xorg-server graphics server version 21.1.1, the Mesa 3D library in 21.2.5, Gtk4 4.4.0 and Qt 5.15.2. The python interpreters are en 3.10.0 et 2.7.18. The XFCE desktop environment is updated to version 4.16. The MATE desktop environment is a 1.26 version . The GNOME desktop environment is also updated to version 40.1.1 The KDE desktop environment is available in Plasma 5.23.3, Framework 5.88.0 and applications in 21.08.3. Available browsers are: Firefox 94.0.2, Chromium 96.0.4664.45, Epiphany 40.3, etc Many desktop applications have been updated as well like Thunderbird 91.2.0, Scribus 1.5.7, Libreoffice 7.1.5.2, Gimp 2.10.28, etc. Read more