If you’ve ever wanted to wind balls of yarn, then look no further than this automated machine from Mr Innovative. The YouTuber’s DIY device is powered by an Arduino Nano and an A4988 stepper driver, spinning up a round conglomeration of yarn via a NEMA17 motor and a timing belt.

The ball is wound on an offset spindle, which is mechanically controlled to pitch back and forth and spin itself as the overall assembly rotates, producing an interesting geometric pattern.

Little Bee is an affordable, open-source hardware, and high-performance current probe and magnetic field probe designed to debug and analyze electronic devices at a much lower cost than existing solutions such as Migsic CP2100B or I-prober 520. This type of tool is especially important for power electronics, which has become ever more important with electric vehicles, alternative energy solutions, and high-efficiency power supplies.

The Coanda effect, as you may or may not know, is what causes flowing air to follow a convex surface. In his latest video, James Bruton shows how the concept can used as a sort of inverted ping pong ball waterfall or staircase.

His 3D-printed rig pushes balls up from one fan stage to another, employing curved ducts to guide the lightweight orbs on their journey.

The fan speeds are regulated with an Arduino Uno and motor driver, and the Arduino also dictates how fast a feeder mechanism inputs balls via a second driver module. While the setup doesn’t work every time, it’s still an interesting demonstration of this natural phenomenon, and could likely be perfected with a bit more tinkering.