Open Hardware/Modding Leftovers
-
Arduino Blog » ESUB Tracks is a smart bicycle helmet with built-in electronics for enhanced safety
Bike helmets can help minimize injuries in the event of an accident, but could a helmet also be used to help prevent a crash, or even enhance your riding experience? ESUB Tracks from WertelOberfell attempts to do both, featuring a variety of electronic enhancements which are powered by photovoltaic cells wrapped around its outer surface.
ESUB Tracks includes a lighting arrangement on the back for turn signaling, triggered using voice commands to the helmet’s piezoelectric microphone. Additionally, it has a sensor to detect rapidly approaching vehicles from behind, warning the wearer of this condition via haptic feedback. Bone-conductive speakers are provided for listening to Bluetooth audio, and if all of that wasn’t enough, it even tightens down the straps when the buckle is fastened.
-
Take part in the PA Raspberry Pi Competition for UK schools
-
ESP32-S2 board targets battery-powered applications with 30uA deep sleep power consumption
A few months ago, Olimex unveiled renders of ESP32-S2-Devkit-LiPo WiFi board that was supposed to consume as little as 2uA in sleep mode, follows ESP32-S2-Saola-1 board form factor and pinout, and adds an ultra-efficient circuitry to support LiPo batteries. The good news is that Olimex has now launched two versions of their ESP32-S2 board optimized for battery-powered applications with ESP32-S2-DevKit-Lipo and ESP32-S2-WROVER-DevKit-Lipo (with 2MB PSRAM) going for 5.56 Euros and 6.36 Euros respectively.
-
Testing PTFE Tube for 3D Printing
Karl here. I’m back with a short article on some testing that I did on PTFE tube. When I received the Sovol SV02 3D printer it came with some baby blue replacement PTFE tube. It came preinstalled with the regular white stuff that most Bowden style printers come with. I have also been thinking about different ways to use the Retraction Calibration Tool I created.
- Login or register to post comments
- Printer-friendly version
- 3882 reads
- PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is releasedAfter three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. |
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future TechThe metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. |
today's howtos
|
Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago