Language Selection

English French German Italian Portuguese Spanish

GNU/Linux and Arduino on Open or Hacker-Friendly Hardware

Filed under
Hardware

  • Jetson Nano Robot | Hackaday

    [Stevej52] likes to build things you can’t buy, and this Jetson Nano robot falls well within that category. Reading the project details, you might think [Stevej52] drinks too much coffee. But we think he is just excited to have successfully pulled off the Herculean task of integrating over a dozen hardware and software modules. Very briefly, he is running Ubuntu and ROS on the PC and Nano. It is all tied together with Python code, and is using Modbus over IP to solve a problem getting joystick data to the Nano. We like it when existing, standard protocols can be used because it frees the designer to focus more on the application. Modbus has been around for 40 years, has widespread support in many languages and platforms.

  • Ryzen Embedded module delivers 32GB RAM and quad displays

    Ibase’s “ET977” is a COM Express Basic Type 6 module that runs Ubuntu or Win 10 on a Ryzen Embedded V1000 or R1000 with up to 32GB DDR4 and up to quad display support plus GbE, PCIe x8, and a USB 3.1 Gen2 interface.

    In July 2019, Ibase announced an ET976 COM Express Basic Type 6 module with AMD’s Ryzen Embedded V1000. Now it has returned with a more advanced ET977 Basic Type 6 entry that adds support for the Ryzen Embedded R1000. Other recent Ibase products based on Ryzen Embedded include the 3.5-inch IB918 SBC and a fanless, embedded ASB200-918 computer based on it.

    [...]

    Although the manual lists only Windows 10, the announcement says the module also supports Ubuntu.

  •   

  • Arduino Blog » This LED coffee table reacts to whatever’s on top

    The YouTube team “Ty and Gig Builds” recently decided to make their coffee table a little more interesting, adding a chain of 96 addressable LEDs underneath its clear surface. This would have been neat enough by itself, but their project doesn’t just stop there and instead embeds 154 IR emitters and 154 IR receivers, allowing it to react to what’s on top. Beyond that, it’s able to display animations without using the sensors for a mesmerizing effect.

    The setup, as you might imagine, required a lot of wiring along with custom shift register and multiplexer boards to accommodate its vast I/O needs. These discrete I/O are eventually funneled down to an Arduino Mega for control, creating a one-of-a-kind table that should make for a great conversation piece while holding coffee and other knickknacks.

  •  

  • ESP32 CNC Controller Board Supports Grbl Arduino Firmware

    Grbl_ESP32 CNC development board is a breakout board for NodeMCU 32S board that also takes three stepper motor drivers, and designed to run Grbl open-source Arduino firmware to control wireless CNC machines. Grbl_ESP32 CNC breakout board specifications: Socket for NodeMCU 32S board with ESP32 WiFi and Bluetooth dual-core SoC 3 sockets for stepper motor drivers such as TI DRV8825 types and others.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.