Language Selection

English French German Italian Portuguese Spanish

Announcing EPEL-8.0 Official Release

Filed under
Red Hat

The EPEL Steering Committee is pleased to announce that the initial EPEL-8 is ready for release. We would like to thank everyone in the community for helping us get the initial set of builds out to mirrors and to consumers worldwide. Special thanks go to Patrick Uiterwijk, Jeroen van Meeuwen, Robert Scheck, and many others in the community who helped in the last 6 months to get this release done.

EPEL-8.0 has packages for the x86_64, ppc64le, aarch64, and now the s390x platforms.
What is EPEL?

EPEL stands for Extra Packages for Enterprise Linux and is a subcommunity of the Fedora and CentOS projects aimed at bringing a subset of packages out of Fedora releases ready to be used and installed on various Red Hat Enterprise Linux (RHEL). It is not a complete rebuild of Fedora or even of previous EPEL releases. EPEL is also a community and not a product. As such we need community members to help get packages into the repository more than done in Fedora.

Read more

The full E-mail message

  • EPEL 8.0 released
    The EPEL Steering Committee is pleased to announce that the initial
    EPEL-8 is ready for release. We would like to thank everyone in the
    community for helping us get the initial set of builds out to mirrors
    and to consumers worldwide. Special thanks go to Patrick Uiterwijk,
    Jeroen van Meeuwen, Robert Scheck, and many others in the community
    who helped in the last 6 months to get this release done.
    
    EPEL-8.0 has packages for the x86_64, ppc64le, aarch64, and now the
    s390x platforms.
    
    ## What is EPEL?
    
    EPEL stands for Extra Packages for Enterprise Linux and is a
    subcommunity of the Fedora and CentOS projects aimed at bringing a
    subset of packages out of Fedora releases ready to be used and
    installed on various Red Hat Enterprise Linux (RHEL). It is not a
    complete rebuild of Fedora or even of previous EPEL releases. EPEL is
    also a community and not a product. As such we need community members
    to help get packages into the repository more than done in Fedora.
    
    If you are interested in getting a package into EPEL, contact the
    package maintainer through bugzilla. This way the request can be
    tracked, and if the primary maintainer is not interested in branching
    to EPEL, others can step in and do so. Optionally you can send a
    request to the epel-devel@lists.fedoraproject.org mailing list. If you
    do so, please include why the package is needed, to help other
    volunteers decide whether they can support it.
    
    ## What is new?
    
    ### Playground for Rawhide like things
    We have added an additional set of channels for EPEL-8 called
    playground. It is similar to Fedora Rawhide so packagers can work on
    versions of software that are too fast moving or will have large API
    changes compared to versions in the regular channel.
    
    To make this purpose transparent, when a package is built in epel8, it
    will normally also be built in epel8-playground. This is done via a
    packages.cfg file which lists the targets for fedpkg to build against.
    A successful package build will then go through two different paths:
    * epel8 package will go into bodhi to be put into epel8-testing
    * epel8-playground will bypass bodhi and go directly into
    epel8-playground the next compose.
    
    If a packager needs to focus only on epel8 or epel8-playground they
    can edit packages.cfg to change the target=epel8 epel8-playground to
    target=epel8.
    
    Packages in epel8-playground are intended to be used in the following manner:
    * To test out a new version of the package that might not be stable yet.
    * To test out new packaging of the package
    * To test a major version change of the package intended for the next
    EPEL-8 minor release.
    * To build a package that will never be stable enough for EPEL-8, but
    still could be useful to some.
    
    At minor RHEL releases (ie, 8.1, 8.2) people can pull in big changes
    from playground to the main EPEL-8 packages. Since people will be
    upgrading and paying more attention than usual anyhow at those points,
    it’s a great chance to do that change, but you can test beforehand in
    the playground to make sure these changes work.
    Consumers should be aware that packages in EPEL8-playground are
    without any Service Level Expectations. You may want to only cherry
    pick packages from the playground as needed.
    
    ### New Architecture: s390x
    
    We have added the s390x platform to builds. Some consumers have wanted
    this platform for many years but we did not have the time to integrate
    necessary changes. We have done this with EPEL-8, and hope to be able
    to do so for EPEL-7 if there are continued requests for it.
    
    ## What is next? (Why is it called EPEL-8.0?)
    The goal for EPEL-8.1 will be implementing modules into the
    repository, which allows builds for packages that depend on
    non-shipped devel packages. It also allows maintainers to supplement
    and replace other packages they could not under standard EPEL rules.
    
    ## Known Issues:
    1. EPEL-8.0 does not come with modules. Packages built for perl,
    python and other modules are only built against “default” modules. For
    example installing a perl library from EPEL will work with the
    perl-5.26 but not with the perl-5.24 module.
    2. RHEL-8.0 and RHEL-8.1 beta do not come with the same packages in
    all architectures. There are 720 ‘desktop’ packages which were only
    shipped for x86_64 and ppc64le. Packagers looking to deliver GNOME,
    KDE, or other platforms will need to exclude s390x and aarch64 at this
    time.
    3. The dnf in RHEL-8.1 beta does not work with the EPEL repository due
    to zchunk code. This has been opened as an upstream bug as
    https://bugzilla.redhat.com/show_bug.cgi?id=1719830
    4. Until modularity and module builds are implemented in EPEL, there
    will be many packages which can not be built for EPEL. This is mainly
    due to RHEL-8 not shipping many -devel packages and the need for us to
    rebuild those packages in a module to make those -devel available to
    build against. When running into this please open a ticket with
    https://pagure.io/epel/new_issue for us to put in a request for it to
    be added to Red Hat’s Code Ready Builder. Please list the package(s)
    which is blocked from being built because of its absence. We will
    collate these items into bugzilla tickets which will be reviewed by
    the Red Hat product groups to see if they will be added in future Code
    Ready Builder releases. Doing this will ensure that we do not have 70
    requests for foo-devel but can have one with all the packages needing
    it.
    5. /usr/bin/python does not exist in RHEL8. Developers should aim
    towards /usr/bin/python3 or /usr/bin/python2 and patch appropriately.
    Python2 packages are discouraged. RHEL-8 will contain python2.7 until
    probably the end of life of RHEL-7. However support upstream will only
    be minimal. When modularity occurs, we suggest that you make whatever
    python2 packages modules which can be pulled out when RHEL-8.N no
    longer has python2.
    6. python2-sphinx is not shipped. Most packages should work with
    python3-sphinx, and if it doesn’t please open a bug. The python team
    has been good about making fixes for this.
    7. When branching python packages, be aware that python in EL-8 is
    python36 and not the version currently in rawhide. This has come up
    with a couple of test packages where they assumed python37 or later.
    8. While EL-8 comes with platform-python, it should NOT be used in
    Requires: unless absolutely necessary. python3 should be used instead.
    (Exceptions can be made but will be rare and need justification.)
      * Accepted exception: Use python3.6dist(coverage) instead of
    python3-coverage. This package is not shipped but is needed in %check
    code.
    10. Sometimes RHEL8 only has a python3 package for a dependency you
    need for your build. (Example: python-bleach requires
    python2-html5lib, but RHEL8 provides only python3-html5lib). For
    EPEL-8.0 we recommend strongly to only focus on python3 subpackages..
    11. RHEL-8 was built with packages which were not shipped. In general
    it is OK to branch these packages and build them in EPEL.
    12. systemd-rpm-macros is not a separate packages. If needed, used
    BuildRequires: systemd
    13. You will need to make sure you have a version of fedpkg greater
    than fedpkg-1.37-4 to work with both `epel8` and `epel8-playground`.
    Versions before that should work with just `epel8`.
    
    ## Developer requests for multiple branches
    Branching is handled the same way as requesting a branch using fedpkg
    request-branch. A maintainer can request an epel8 branch using fedpkg
    request-branch epel8 which will create a ticket in
    https://pagure.io/releng/fedora-scm-requests/issues and Release
    Engineering will process these requests.
    To branch multiple packages please use this or a variant of this script:
    
    ```
    #!/usr/bin/sh
    # Reminder to get an updated pagure token for releng tickets
    # Usage: epel-8.sh package1 package2 package3 package4
    if [ $# -lt 1 ]
    then
        echo "At least one package name should be provided"
    else
        TMPDIR=`mktemp -d /tmp/epel8.XXXXXX`
        pushd "$TMPDIR"
        for pkg in "$@"
        do
            fedpkg clone "$pkg"
            pushd "$pkg"
            fedpkg request-branch epel8
            fedpkg request-branch epel8-playground
            popd
        done
        rm -rfv "$TMPDIR"
    fi
    ```
    
    Releng will then work through the tickets in the system which is
    adding branches to the PDC and src.fedoraproject.org.
    
    ## Known RHEL-8 packages missing -devel
    * libblueray-devel
    * liba52-devel
    * libXvMC-devel
    * libdvdnav-devel
    * gfbgraph-devel
    * libuv-devel
    * rest-devel
    * qgpgme-devel
    
    ## Definitions
    * Package maintainer. Person who has accepted responsibility to
    package and maintain software in the Fedora Project ecosystem. The
    main packager is usually someone focused on Fedora Linux, and
    secondary packagers may be focused on particular use cases like EPEL.
    * Consumer. A person who has subscribed to EPEL for packages but is
    not a maintainer.
    * PDC. Product Definition Center. A tool to help list the lifetime and
    permissions that a product has so that branching and updates can be
    better managed.
    
    
    

Now covered by Michael Larabel

  • EPEL 8.0 Is Now Ready To Offer Up More Packages To Red Hat Enterprise Linux 8 Users

    EPEL 8.0 is now ready for users of Red Hat Enterprise Linux 8 and the eventual CentOS 8 for complementing the standard repositories with extra packages for what is found in Fedora.

    The "Extra Packages for Enterprise Linux" continues providing a sub-set of Fedora's packages to RHEL/CentOS users. Just as they've done for prior RHEL series, EPEL 8.0 provides updated/additional packages for Red Hat Enterprise Linux 8.0 / CentOS 8.0 users.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.